|
THE WMF RANGE OF FAN - ASSISTED STORAGE HEATERS
The WMF range off an assisted off peak heaters from Derby Heat Banks in South Australia is the ultimate in storage heating technology.
Select preferred comfort conditions
The excellent controllability of the WMF range of heaters ideally suit family living rooms and lounges, where user control is most desired. By altering the room temperature control, you can select preferred comfort conditions. Just switch on the two-speed fan, and draw air through the heater core. The heated air is discharged into the room through the low level outlet grille. By using the fan, the room temperature is increased very quickly.
Thermostat controlled
The room temperature sensor controls the operation of the fan until the preferred comfort conditions have been achieved, at which point the fan automatically switches off. The heat retaining core is surrounded by enhanced insulation, giving low case emission which is sufficient to maintain a room at approximately 15°-18°C, retaining more heat until a higher temperature is needed, resulting in greater heat controllability with increased efficiency.
The heat retaining core is surrounded by enhanced insulation, giving low case emission which is sufficient to maintain a room at approximately 15°C, retaining more heat until a higher temperature is needed, resulting in greater heat controllability with increased efficiency.
Get Instant heat using the boost element.
A unique feature of a WMF heater is the boost element if, for example during summer, the heater has been turned off and the weather turns unseasonably cold, the boost element can be turned on for instant heat.
Economical
During normal operation, this element can only be activated when the storage bricks are not hot, this avoids using electricity unnecessarily. WMF heaters have been specifically designed to ensure that maximum heat output is maintained at minimum cost.
|
|
